|
Water Gem
Water Filtration
Kit
If you do nothing else with your water
supply you should at least have a basic filtration system for your drinking
water.
The Water Gem kit is an ideal way of
accomplishing chlorine free drinking water.
It is also an ideal way of connecting your
Masterpiece Ioniser to the mains water supply in the UK because of all the
different types of water taps available.
This also negates a tap converter 'hanging'
down into your sink as well as providing an initial filtration system and
protection for your investment.
These can be fitted relatively easily
by any competent DIY enthusiast in 1/2 to 3/4 of an hour.
The
Water Gem comes complete with
absolutely everything you need for simple DIY fitting, including clear
step-by-step instructions.
There is no need to cut off
the water supply or to cut any pipes.


The
Water Gem can be fitted into
all kitchen units and the tap can be installed on either surface-mounted or
countersunk sink units.
The filter cartridge is
easily replaced with simple push-in connectors.
Please make sure when fitting the filter
brackets that the filter will be in a vertical position as in the photo.
Occasionally one common fault that we
have come across with people fitting the Water Gem is that when they have
punctured the cold water pipe with the screw in plunger but they do not unscrew
it back out, so have a slow / restricted water supply to the sink faucet.
Please make sure that you have unscrewed
the plunger back out to get the maximum benefit and water pressure from your
Water Gem unit.
Water Gem - Water Filtration Kit
 
|